Stick-On Reinforced Base Upgrade – 10mm of Control Where It Counts
There’s nothing worse than gear that moves when you’re pushing hard off-road.
We’ve been testing a new upgrade across our rackless systems, and it’s simple—but it changes everything.
What It Is
A 10mm reinforced stick-on base layer designed to bond directly to your rackless setup.
Built from a dense foam/rubber composite, with a non-memory poly board sandwiched through the centre, it adds structure without adding bulk.
That internal board doesn’t compress or deform—so it holds its shape under load.
Double Reinforcement. By Design.
All Nomad Moto rackless bases already have internal reinforcement.
This upgrade adds a second layer of structure, giving you extra support where it matters most.
- Less flex
- Better load distribution
- More stability under pressure
Optional Upgrade — Not a Fix
Let’s be clear.
Your rackless system already works as intended.
This is not something you need—it’s something you can add if you want to push your setup further.
Some riders won’t run it.
Some will never need it.
But for those chasing the tightest possible setup—this is where it comes in.
What You’ll Notice On the Bike
- Less movement over rough terrain
- A tighter, more planted setup
- Better contact between the base and the bike
- Reduced vibration over long days
It just locks in better.
Minimal Weight. Maximum Effect.
This upgrade adds approximately 180 grams.
That’s it.
No bulk. No compromise to the rackless philosophy.
Just more control where it counts.
Who It’s For
You’ll get the most out of this if you:
- Ride aggressive off-road terrain
- Run heavier loads
- Have a bike with minimal or flexible rear subframe
- Want your setup sitting as tight as possible
Works Across the Full Range
Compatible with:
- Strzelecki Rackless (all sizes)
- Stockman Rackless (25L & 50L)
- All Nomad Moto rackless bases
Apply and ride.
Final Word
Rackless already changed how riders pack.
This just refines it.
- Optional
- Lightweight
- More stable
NO BULK. RIDE FURTHER.