How to Repair a Tubeless Tyre on the Go

How to Repair a Tubeless Tyre on the Go

(Without Removing the Wheel Like a Rookie 😅)

If you've ever seen someone pull their rear wheel off in the middle of nowhere only to realise “hang on... I’m running tubeless” — don’t worry, you're not alone. It happens more than you'd think. But the beauty of a tubeless setup is that it’s designed to be repaired on the bike, quickly and with minimal tools — if you know what you’re doing.

So let’s break it down: here’s how to repair a tubeless tyre on the go, the easy way.

---

Step 1: Don’t Panic

That sudden loss of air doesn’t mean the ride is over. Most tubeless punctures are quick fixes with a simple plug kit.

---

Step 2: Find the Leak

Pump a little air into the tyre if it's flat, and listen for the hiss. Can’t hear it? Splash some water (or spit, let’s be honest) on the tyre and look for bubbles. Found it? Good — now mark it if you can.

---

Step 3: Plug It

You’ll need a tubeless plug kit, which should always live in your tool roll.

1. Use the reamer (rough-looking needle tool) to clean and rough up the hole.

2. Load a plug (looks like a sticky strip of jerky) into the plug tool.

3. Jam it in the hole, leaving a bit of the strip sticking out.

4. Pull the tool out, leaving the plug in the tyre.

5. Trim the excess, but not too short — it’ll wear down naturally.

---

Step 4: Inflate It

Use your mini compressor, CO₂ canisters, or hand pump. If you’ve plugged it properly, the tyre should hold pressure right away.

Pro tip: carry a mini pressure gauge to avoid over-inflating and blowing the plug out.

---

Step 5: Ride On

Keep an eye on it, check your pressure at the next stop, and you're golden. If it's still leaking a bit, repeat the process or double up the plugs.

---

Bonus: What If It Won’t Seal?

If the hole is too big for plugs, you’ve got two options:

1. Throw a tube in – yes, even in a tubeless tyre. Carry one as backup.

2. Use tyre sealant – some riders keep a small bottle of tubeless sealant for emergencies.

---

The Wrap-Up

Running tubeless is one of the best things you can do for adventure riding — fewer flats, and easy roadside repairs. Just don’t be that guy pulling his wheel off for no reason.

So next time you get a puncture, remember:
💡 If you’re running tubeless — keep it on the bike and plug it like a pro.

Stay safe out there,
The Nomad Moto Team